How to connect directv to wifi without connection kit

I got DIRECTV to watch TV, because everyone else in my part of town had it, and I thought it would be easier to set up with existing cable lines…

But soon, I got bored watching the limited variety of channels available because when I really feel like watching my favorite movie or show, I’ll have to wait for it to play on one of those channels.

So, I decided to connect my DIRECTV to Wi-Fi. Fi, but I had a little problem: I didn’t have a connection kit.

So I looked up all the ways you can connect DIRECTV to Wi-Fi and got the following results.

To connect DIRECTV to Wi-Fi without a connection kit, turn on your wireless router and go to Internet Settings > Advanced Settings > Network Reset Settings, or connect your receiver to the modem using an Internet cable.

What is the DIRECTV Connection Kit?

DIRECTV Cinema Connection Kit (CCK) is a kit that allows you to connect your DIRECTV to the Internet.

It comes in both wired and wireless configurations, but the wireless one is called CCK while the other is called DECA BB (Directv Ethernet Coax Adapter-Broadband).

So here we’re going to talk about the Wireless Theater Connection Kit.

With the DIRECTV CINEMA Wireless Connection Kit, you can get DIRECTV CINEMAplus service and other broadband services from DIRECTV.

You don’t have to worry about any major wiring running through your house as it will easily connect your wireless router to the DIRECTV receiver.

Install a broadband DECA or receiver in your router and receiver (if you don’t already have one) to bring Internet connectivity to the receiver before connecting the Wireless Cinema Connection Kit.

You can find a power adapter, ethernet cable, coaxial cable, and wall/base mount kit manual inside your connection kit.

Why do you need the connection kit?

In the year 2000, DIRECTV didn’t have an option to connect to the Internet.

See Also:  How to secure (pair) the Powerline Network

But after that, they put an ethernet port on almost all their equipment to make it easy to connect to the Internet.

However, not everyone had network outlets in every room to connect their Genie mini-receivers.

People ran a lot of long cables to connect their DIRECTV to the Internet, but it was expensive.

With the introduction of SWM technology, all receivers can be connected to a single connection point called a Cinema Connection Kit.

So if you are using a DVR for For the whole house, it’s easier for you to connect all your receivers.

The connection kit eliminates the need to wire your network connection throughout your home by allowing simple installation using your wireless network.

Wireless-capable DIRECTV Models

Wireless is built into only 3 of the models: Genie HR44, Genie HR54 and Genie H44.

Must make sure you have these models; otherwise, you’ll need a Cinema Connection Kit to connect to the Internet.

Connect DIRECTV to Wi-Fi over a wireless connection

Once you have secured If you have any of the above models, you can start the procedure.

You must make sure that all network related settings are set to default. Reset your network settings by turning on DIRECTV and going to the Internet Settings section in settings.

Once you do that, a message will appear on the screen asking you to reconnect to the Internet. You will need broadband internet and a wireless network router.

Now, click on the Advanced Settings option to access Advanced Settings.

Now select Reset Settings by pressing the Network Reset button.

A notification bar will appear indicating that the process will take several minutes and may interrupt any recording and TV sessions.

See Also:  How to make a 3D website with VECTARY

p>

p>

You can either press the DASH (-) icon, which will allow you to continue with the setup, or you can press the Back button to cancel it.

Now, wait for a while to complete the process.

Once the process is complete, go to MENU> Internet Settings> Reconnect to Internet Option.

After clicking the Reconnect to Internet option, it will be directed to a page where you will be asked if your Internet connection is working, click yes.

Now, you will be asked about the changes to your router’s wireless network settings. In that case, click Set up wireless to update.

Select the next step if you don’t have a wireless router.

You can find the Set up wireless option in the bottom right corner of your screen, click on it, your device will now start to search for wireless networks.

Then you will be presented with a list of all available networks that are in that area.

From the given list, select your wireless network, enter your password, and then the system boots the verification process.

Once the process is complete, your DIRECTV will be connected to the Internet.

Now all you have to do is select the Done button on the complete Internet setup screen.

The setup process is now complete and you can now enjoy your favorite shows .

Connect DIRECTV to Wi-Fi Using a Wired Connection

You can opt for a wired connection if you don’t have a wireless connection.

To do that, connect one end of your Internet cable to the receiver and the other end to your modem.

Wait for a while, and then a message will appear on the screen saying You are connected to Internet.

In case the connection is not set up, you need to reset the network settings.

See Also:  How to connect your phone to your tv wireless

To do that. Go to Menu > Internet Settings > Advanced Settings > Cable Settings.

Your device will now check the connection status.

Your DIRECTV will now be connected to a cable connection.

Final Thoughts

When it comes to the HR 34 Genie DVR, you can connect your Internet cable directly to the Genie DVR; Sometimes this makes it not work in a room.

While for Genie DVR, you won’t need a separate box of hookup kits as the hookup kit is already built in.

There is a built-in Wi-Fi setup in the case of the HR 44 Genie DVR, making Internet sharing child’s play.

With the built-in Wi-Fi, you can connect all receivers wirelessly as no cables are required.

You may also enjoy reading:

  • DIRECTV Network Connection Not Found – How to Fix
    • li>
    • How to Connect DIRECTV Box to TV without HDMI [2021]
    • DIRECTV Not Working – How to Troubleshoot
    • Returning DirecTV Equipment – Easy Guide [2021 ]

    Frequently Asked Questions

    Can I connect DIRECTV without a cable box?

    Yes, now you can enjoy DIRECTV services without additional cable boxes .

    Why won’t my DIRECTV connect to the wireless network?

    The connection may be broken or maybe due to a poor signal, please locate your wireless bridge and see if it is upright and at a safe distance from your DVR and Wi-Fi router.

    How do I connect my DIRECTV box without HDMI?

    Turn off your box or cable box, plug one end of the HDM Me cable into the back of the wire box.

    How do I check my DIRECTV Internet connection?

    Press the menu button on your remote and go to Settings & Help > Settings > Info & Test > More System Info . Scroll down until you see Network: Connected and Internet: Connected.

    .

Leave a Reply

Your email address will not be published. Required fields are marked *