How to Pick a Mailbox Lock? – Quick and Efficient Process

  • Step 1: Lubricate the lock (optional).

This is a way to remove dirt and increase friction between the bit and the lock. You can use any type of lubricant, but in this case the WD-40 manual spray lubricant is recommended. you can also use it for other occasions, like when a lock freezes up in winter.

  • Step 2: Remove the dust cover from the keyway.

using a screwdriver to pry it open is the best way to apply enough force without damaging the other parts inside.

  • step 3: place your drill on top of the keyhole at the point known as the grub.

There will be about 4-5 pins in the mailbox lock, so drill until you hear and feel 5 distinct clicks. once you have successfully destroyed the pins, there is no need to drill too deep. you only need to use a screwdriver as a key to turn and unlock the mailbox without a key.

friendly note: you should ensure the safety and quality of the drill, and be careful when drilling because a drill that is too thin will break easily. on the other hand, you don’t want the hole to take up all the space and prevent you from putting in another one.

2. use bobby pins or clips

  • Step 1: Gather Your Supplies

two pins – one will function as a key, applying pressure to the lower pins and turning the spindle. the other will act as a pick, lifting the pins and forming the hairpin.

See Also:  Reread After Sending: E-mail Impulses by Personality Type | 16Personalities

a pair of pliers: many people believe that we do not require the use of pliers. however, I found that this will help you bend or straighten segments of the clip without hurting your hand.

  • step 2: adjust the shape of the fork

First, straighten the clip onto a long metal bar with the pliers. second, put the clip about a centimeter into the keyhole. then, using just a few millimeters of the tip, bend the rest of the clip to the left about 45 degrees.

Third, use the tension wrench, which is the second clip, and bend about a quarter to a third of the clip with the pliers. then, flatten the loop that forms when you bend it with the pliers. make an l-shape out of half of the component you just built, including the part it was placed on.

  • Step 3: Choose a direction of rotation

To test the flexibility of the shaft, insert the key into the keyhole. if the key does not move while the spindle is turning clockwise, the spindle will turn counterclockwise. After determining the direction of rotation, put the key at the lowest point and place it on the cutting line. the key will now work as a lever.

  • Step 4: Determine Pin Positions

place the pick in the deepest position. to make contact with the pins, simply turn the bent tip up. For best results, be sure to apply enough force. you want the pins to line up with the cut line. slowly repeat this process several times to make sure you hear the pin springs clink.

  • step 5: pull the pins up
See Also:  Hướng dẫn cách gửi email marketing bằng Gmail miễn phí và Google Sheets

make sure the key stays positioned on the cut line. insert the pick while keeping the tip up. then start pushing up on the first pin. since all the pins will be at the top of the lock, focus on that area. To put the pin into position, gently shake the pick until it clicks into place. you will need to listen for the “click” sound to determine if it fits properly. when you release the pin and no longer stop the axis, you will hear this sound.

  • step 6: throw away the remains

Leave a Reply

Your email address will not be published. Required fields are marked *